How to Replace Garage Door Tracks

What You’ll Need:

• New garage door tracks
• Wrench set
• Screwdriver
• Pliers
• Measuring tape
• Safety gloves and goggles

Steps to Replace Your Garage Door Tracks

1. Disconnect the Garage Door Opener:

   • Unplug the opener and pull the emergency release cord to disconnect the door from the opener. This prevents accidental movement.

2. Open the Garage Door:

   • Lift the door manually and secure it in place using clamps or locking pliers on the track to keep it from falling.

3. Remove the Old Tracks:

   • Unscrew the brackets holding the damaged track in place.
   • Carefully detach the track from the rollers, starting from the bottom and working your way up.

4. Measure and Align the New Tracks:

   • Use the old track as a guide to measure and ensure the new track is the same size.
   • Align the new track with the door rollers and ensure it’s level and properly positioned.

5. Install the New Tracks:

   • Attach the new track to the brackets and secure it with screws.
   • Ensure all screws and bolts are tight but not overly tightened to avoid warping the track.

6. Test the Alignment:

   • Slide the door up and down manually to check for smooth movement. Adjust the track if necessary to ensure proper alignment.

7. Reconnect the Opener:

   • Reattach the door to the opener and test its operation.

Safety Tips:

• Always wear gloves and goggles to protect your hands and eyes.
• Be cautious when working with garage door springs; they are under high tension and can be dangerous.
• If you’re unsure about any step or notice issues with springs, cables, or the opener, contact a professional for help